txhunter69

how hard is replacin the heater core on a dodge i know on bowhays chevy it was a pain

CamBirdRacing

You live in Texas, you dont' need no stinking heater. Oh wait, that's just in Houston.

mopar1968

we do them here at the dealership in a hour and 1/2.


''JUST MY TWO CENT'S WORTH''

txhunter69

you have to rake the dash off right

THERATTLER

ONLY IF IT HAS LEAVES ON IT

mopar1968

Yeah there is only 7 bolts that holds it, 5 accross the top next to windshield, 1 on each side at the kick panel. Take the bulk connector loose, with a 10mm socket, lift dash out, there are 5 nut's at outer firewall behind engine, take nut's off remove heater box, place on table, take 12 philips, screws out lift off top remove heater core, reinstall in reverse order or turn computer upside down :!: :!:

''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312

FullTimeRacing

thoses dashboards like to crack.good luck

mopar1968

They do :?: :?: :? :? I have never seen one crack if it is done right :!: :!: Been doing this for 27 years now :!: :!:


''JUST MY TWO CENT'S WORTH''

http://www.racingjunk.com/profile/163312

txhunter69

haha i think ims find a new dash and just swap it out at the same time cause her dash is f****d