I have decided to sell my 06 GMC Sierra 2500HD gas truck.
Im the 2nd owner and have put alot of work into it over the years. I will start by saying all the work was done correctly and professionally. My wife and I own BaM Fabrication & Color in Spring Grove IL. This truck has been our tow vehicle for our racing and hauling customers cars. Our business has grown and I'm looking to buy a diesel. The bed was replaced with a rust free bed from Texas. Before it was installed I sprayed a bed liner on the underside. This was a solid truck with the typical rust coming through the rockers. I like my stuff nice and I want it to last. Inner and outer rockers , cab corners, OEM fenders all replaced. Before the parts were replaced they were epoxied on both sides. I put a custom paint job on it using PPG Envirobase waterborne system. Doors were taken off all seams grinder down and epoxied. Only the best 2 part seam sealers used along with all kinds of other top tear products. After the truck was done it was cavity waxed in every hard to reach area. The interior was also done. Leather front buckets by Casio, replaced underlayment and carpet. Two toned the door panel accessories. Hinge pins replaced when I had the doors off. Even the door jams are two toned. Front wheel bearings, axles, all body mounts, stainless brake lines, trans lines oil cooler lines, Radiator, hoses, brake caliper rubber lines, and so much more all replaced. The tires I just replaced and towed a finished car to New York so they have just under 2000 miles on them. The lost goes on and on. I would have charged 25 to 30 thousand for the body and paimt work if this was a customer's truck. Its a must see. If you have any questions feel free to ask. Thanks for looking.
