Reher Morrison top end package from Bob Rahaim's NHRA Pro Mod. Before retiring he updated to their most recent heads and intake and these parts were removed in good working order. This stuff was not removed from some blown up engine. Those guys ran really, really well in NHRA Pro Mod with these parts. The heads will work on Reher 872, 908, and 959 engines. The Switzer billet intake and pushrods are for a 12" deck height which is going to be the 908 combination. You can always make spacers and use the manifold on a higher deck height motor if need be (the 959s are 12.5). Here is the rundown:
-Switzer all billet intake with 5 stages of nitrous, throttle bodies, linkage, fuel rails and lines, fuel filter, air temp sensor, throttle position sensor, injectors for water injection, nitrous lines and shower heads, two carbon hood scoop isolator trays and one offset height aluminum one. Also included is a box of runner spacers that can be used internally in the plenum, as well as the tool to change them. This intake and parts alone were well over $25k new. Will work on 12.5 deck with spacers but built for 12". Intake manifold price $8500
-Cylinder heads: Two complete cylinder heads with valvetrain in good condition with some runs on them. (three heads pictured but spare head has been sold and is gone) Reher tells me these heads will work on the 872-959 engines that do not have the latest style head which can be identified by it's height from head gasket surface to valve cover gasket surface. Heads with no rocker stands or rockers are currently over $10k new each. Selling each head with each including rocker stands and rocker arms for $6500 each
or $10,000/pair
-Rocker arms: full set of steel intake and exhaust rocker arms, along with 3 spare aluminum rockers. New steel rockers are currently $300 each and aluminums are $150 each. This would be a value of $4,050 in rocker arms . Rocker arms are being sold with each head or will be included in a package deal for the entire top end if desired.
-Pushrods: 12 Manton exhaust 11.720 x .750 and 12 Manton intake 11.300 x .625. Pushrods run around $58 new and this would be a value of $1,392 in pushrods. Pushrods included in package deal.
-Head studs: set of head studs included in package deal
Package deal price $20,000
Located near Charlotte, NC
