midsouthhotrodz at it again?
06-21-2010, 07:47 PM
#274
Junior Member
SHOW GUEST
Join Date: Dec 2008
Posts: 6
You really don't know me and i wasn't praising anybody. No i am not best friends with james or anthony either. I really have traded a couple of times with them and not had any problems at all other than driving up there. The only reason i saw the post is that i like to keep up with the current scammers on here because i do alot of trading myself. I don't usually post on here, but i saw his user name in the post. I posted what i knew about them and got labeled a "newbie" and my opinion was dismissed. If you really don't know someone you should at least hear what they have to say don't you think? That really doesn't make me want to come back and post anything anymore. Bob. Just my opinion!!!!!!!!!
06-21-2010, 09:46 PM
#275
Senior Member
RACING JUNKIE
Join Date: Jan 2006
Location: La.
Posts: 2,890
First of all i donot know either one of these traders/people., and maybe i don't want too.
First and formost both people misrepresented the vehicles that they traded. Neither one knew what they said, and that's sad when you're looking at a potentually $10,000.00 vehicle, which is what it may cost too build either one of them.
First to James, i'm a little amazed that you have traded/sold 300 vehicles and didn't know what your son was trading. If i would have a $10,000.00 vehicle for sale or trade i would know every bolt and nut on it and have proof of it. As for Anthony, he is a child and i don't care if he's 9 yrs old or 15 yrs. old it's your responsibility to know what he's doing and control what he's doing. He can in no way know much about cars even if he's been watching/helping you since he was 10 yrs. old ( and i've seen some nice cars that you have owned/sold in your posting)
Now about Top sportmans post about IP addresses. I'm a little amazed that you didn't know what he was talking about. Every computer logged into RJ shows too him where it's comming from, being a mod for another site for yrs., we have the soft ware to actually see where you live, your physical address ph # etc. and anything else that we might want too know. You are not unknown once you log into the site, every computer has a foot print, how do think the law and fBI track child porn?
O'K about the two vehicles, first i don't like either one of them, 3rd generation Camero's are a dime a doz., the vans i can't believe any body would want one.
2ndly i'm not sure the van that Anthony posted was the bad azz van from Pinks, the van on pinks had port holes, your's did not. I have too admit that the van sounded better than the camero in the vid., but that's only a cam. The Camero sounded like a stock 427 or a stock 454 in my opinion. Still i think you got the better deal, the Camero is a 6 second car with a few changes with what it has. It sounded like it didn't have a gear, converter, or good tuning, maybe some fuel problem. I'd bet money i could turn it into a 6 second car in 48 hrs. for a few hundred bucks. The car weighs 3350 lbs fractory weight. I don't think it has a .738 cam and even if it does it's to big for a pump gas motor. Here's what a 468" pump gas motor is supposed too sound like, the cam is only .659/663 with a 1050 dom.
http://www.motionbox.com/video/show/...f323c441dab7d8
I built the motor in this car and yes i know every bolt and nut, and everything about it, and yes the 9.77 is ligit it ran that at Baton Rouge in March at 137 mph in the qtr. It weighs 3700 lbs without the 200 lb driver.
With that said i still donot believe Anthony should be selling anything without supervision, and far as Burns is concerned he should butt out, he doesn't have a clue about racing or building.
JMO
Zip.
First and formost both people misrepresented the vehicles that they traded. Neither one knew what they said, and that's sad when you're looking at a potentually $10,000.00 vehicle, which is what it may cost too build either one of them.
First to James, i'm a little amazed that you have traded/sold 300 vehicles and didn't know what your son was trading. If i would have a $10,000.00 vehicle for sale or trade i would know every bolt and nut on it and have proof of it. As for Anthony, he is a child and i don't care if he's 9 yrs old or 15 yrs. old it's your responsibility to know what he's doing and control what he's doing. He can in no way know much about cars even if he's been watching/helping you since he was 10 yrs. old ( and i've seen some nice cars that you have owned/sold in your posting)
Now about Top sportmans post about IP addresses. I'm a little amazed that you didn't know what he was talking about. Every computer logged into RJ shows too him where it's comming from, being a mod for another site for yrs., we have the soft ware to actually see where you live, your physical address ph # etc. and anything else that we might want too know. You are not unknown once you log into the site, every computer has a foot print, how do think the law and fBI track child porn?
O'K about the two vehicles, first i don't like either one of them, 3rd generation Camero's are a dime a doz., the vans i can't believe any body would want one.
2ndly i'm not sure the van that Anthony posted was the bad azz van from Pinks, the van on pinks had port holes, your's did not. I have too admit that the van sounded better than the camero in the vid., but that's only a cam. The Camero sounded like a stock 427 or a stock 454 in my opinion. Still i think you got the better deal, the Camero is a 6 second car with a few changes with what it has. It sounded like it didn't have a gear, converter, or good tuning, maybe some fuel problem. I'd bet money i could turn it into a 6 second car in 48 hrs. for a few hundred bucks. The car weighs 3350 lbs fractory weight. I don't think it has a .738 cam and even if it does it's to big for a pump gas motor. Here's what a 468" pump gas motor is supposed too sound like, the cam is only .659/663 with a 1050 dom.
http://www.motionbox.com/video/show/...f323c441dab7d8
I built the motor in this car and yes i know every bolt and nut, and everything about it, and yes the 9.77 is ligit it ran that at Baton Rouge in March at 137 mph in the qtr. It weighs 3700 lbs without the 200 lb driver.
With that said i still donot believe Anthony should be selling anything without supervision, and far as Burns is concerned he should butt out, he doesn't have a clue about racing or building.
JMO
Zip.
06-22-2010, 09:41 AM
#276
Senior Member
DYNO OPERATOR
Join Date: Mar 2009
Location: Booneville,Ms
Posts: 505
Originally Posted by zipper06
First of all i donot know either one of these traders/people., and maybe i don't want too.
First and formost both people misrepresented the vehicles that they traded. Neither one knew what they said, and that's sad when you're looking at a potentually $10,000.00 vehicle, which is what it may cost too build either one of them.
First to James, i'm a little amazed that you have traded/sold 300 vehicles and didn't know what your son was trading. If i would have a $10,000.00 vehicle for sale or trade i would know every bolt and nut on it and have proof of it. As for Anthony, he is a child and i don't care if he's 9 yrs old or 15 yrs. old it's your responsibility to know what he's doing and control what he's doing. He can in no way know much about cars even if he's been watching/helping you since he was 10 yrs. old ( and i've seen some nice cars that you have owned/sold in your posting)
Now about Top sportmans post about IP addresses. I'm a little amazed that you didn't know what he was talking about. Every computer logged into RJ shows too him where it's comming from, being a mod for another site for yrs., we have the soft ware to actually see where you live, your physical address ph # etc. and anything else that we might want too know. You are not unknown once you log into the site, every computer has a foot print, how do think the law and fBI track child porn?
O'K about the two vehicles, first i don't like either one of them, 3rd generation Camero's are a dime a doz., the vans i can't believe any body would want one.
2ndly i'm not sure the van that Anthony posted was the bad azz van from Pinks, the van on pinks had port holes, your's did not. I have too admit that the van sounded better than the camero in the vid., but that's only a cam. The Camero sounded like a stock 427 or a stock 454 in my opinion. Still i think you got the better deal, the Camero is a 6 second car with a few changes with what it has. It sounded like it didn't have a gear, converter, or good tuning, maybe some fuel problem. I'd bet money i could turn it into a 6 second car in 48 hrs. for a few hundred bucks. The car weighs 3350 lbs fractory weight. I don't think it has a .738 cam and even if it does it's to big for a pump gas motor. Here's what a 468" pump gas motor is supposed too sound like, the cam is only .659/663 with a 1050 dom.
http://www.motionbox.com/video/show/...f323c441dab7d8
I built the motor in this car and yes i know every bolt and nut, and everything about it, and yes the 9.77 is ligit it ran that at Baton Rouge in March at 137 mph in the qtr. It weighs 3700 lbs without the 200 lb driver.
With that said i still donot believe Anthony should be selling anything without supervision, and far as Burns is concerned he should butt out, he doesn't have a clue about racing or building.
JMO
Zip.
First and formost both people misrepresented the vehicles that they traded. Neither one knew what they said, and that's sad when you're looking at a potentually $10,000.00 vehicle, which is what it may cost too build either one of them.
First to James, i'm a little amazed that you have traded/sold 300 vehicles and didn't know what your son was trading. If i would have a $10,000.00 vehicle for sale or trade i would know every bolt and nut on it and have proof of it. As for Anthony, he is a child and i don't care if he's 9 yrs old or 15 yrs. old it's your responsibility to know what he's doing and control what he's doing. He can in no way know much about cars even if he's been watching/helping you since he was 10 yrs. old ( and i've seen some nice cars that you have owned/sold in your posting)
Now about Top sportmans post about IP addresses. I'm a little amazed that you didn't know what he was talking about. Every computer logged into RJ shows too him where it's comming from, being a mod for another site for yrs., we have the soft ware to actually see where you live, your physical address ph # etc. and anything else that we might want too know. You are not unknown once you log into the site, every computer has a foot print, how do think the law and fBI track child porn?
O'K about the two vehicles, first i don't like either one of them, 3rd generation Camero's are a dime a doz., the vans i can't believe any body would want one.
2ndly i'm not sure the van that Anthony posted was the bad azz van from Pinks, the van on pinks had port holes, your's did not. I have too admit that the van sounded better than the camero in the vid., but that's only a cam. The Camero sounded like a stock 427 or a stock 454 in my opinion. Still i think you got the better deal, the Camero is a 6 second car with a few changes with what it has. It sounded like it didn't have a gear, converter, or good tuning, maybe some fuel problem. I'd bet money i could turn it into a 6 second car in 48 hrs. for a few hundred bucks. The car weighs 3350 lbs fractory weight. I don't think it has a .738 cam and even if it does it's to big for a pump gas motor. Here's what a 468" pump gas motor is supposed too sound like, the cam is only .659/663 with a 1050 dom.
http://www.motionbox.com/video/show/...f323c441dab7d8
I built the motor in this car and yes i know every bolt and nut, and everything about it, and yes the 9.77 is ligit it ran that at Baton Rouge in March at 137 mph in the qtr. It weighs 3700 lbs without the 200 lb driver.
With that said i still donot believe Anthony should be selling anything without supervision, and far as Burns is concerned he should butt out, he doesn't have a clue about racing or building.
JMO
Zip.
06-22-2010, 10:08 AM
#279
Senior Member
DYNO OPERATOR
Join Date: Mar 2009
Location: Booneville,Ms
Posts: 505
Yea I know I have faults and spell things wrong but I couldn't pass up the opportunity to have something to say against him for saying basically that I'm stupid and don't know what I'm talking about and I might not know what I'm talking about all the time but I put my input in and what I think!!!
06-22-2010, 10:15 AM
#280
Senior Member
RACING JUNKIE
Thread Starter
Join Date: Jan 2008
Posts: 1,230
Young boy burns,
Zip has forgotten more than you will ever know. You will one day get your dose of reality. :lol:
Go back and read your own posts, you aren't much on grammer or spelling yourself genius.
Yea zip I'm dumb as a door nob and don't have a clue about anything that has to do with racing/building!!! :lol: :lol: Since I'm at a loss with cars maybe I'll quiet building my drag car it's a 3rd generation I guess there no more plentiful than that malibu you have beside your user name!! I've actually seen more Malibu's at the drag strip then a 3rd Gen Camaro!! JMO
Zip has forgotten more than you will ever know. You will one day get your dose of reality. :lol:
Go back and read your own posts, you aren't much on grammer or spelling yourself genius.
Originally Posted by burnskustomz
Originally Posted by zipper06
First of all i donot know either one of these traders/people., and maybe i don't want too.
First and formost both people misrepresented the vehicles that they traded. Neither one knew what they said, and that's sad when you're looking at a potentually $10,000.00 vehicle, which is what it may cost too build either one of them.
First to James, i'm a little amazed that you have traded/sold 300 vehicles and didn't know what your son was trading. If i would have a $10,000.00 vehicle for sale or trade i would know every bolt and nut on it and have proof of it. As for Anthony, he is a child and i don't care if he's 9 yrs old or 15 yrs. old it's your responsibility to know what he's doing and control what he's doing. He can in no way know much about cars even if he's been watching/helping you since he was 10 yrs. old ( and i've seen some nice cars that you have owned/sold in your posting)
Now about Top sportmans post about IP addresses. I'm a little amazed that you didn't know what he was talking about. Every computer logged into RJ shows too him where it's comming from, being a mod for another site for yrs., we have the soft ware to actually see where you live, your physical address ph # etc. and anything else that we might want too know. You are not unknown once you log into the site, every computer has a foot print, how do think the law and fBI track child porn?
O'K about the two vehicles, first i don't like either one of them, 3rd generation Camero's are a dime a doz., the vans i can't believe any body would want one.
2ndly i'm not sure the van that Anthony posted was the bad azz van from Pinks, the van on pinks had port holes, your's did not. I have too admit that the van sounded better than the camero in the vid., but that's only a cam. The Camero sounded like a stock 427 or a stock 454 in my opinion. Still i think you got the better deal, the Camero is a 6 second car with a few changes with what it has. It sounded like it didn't have a gear, converter, or good tuning, maybe some fuel problem. I'd bet money i could turn it into a 6 second car in 48 hrs. for a few hundred bucks. The car weighs 3350 lbs fractory weight. I don't think it has a .738 cam and even if it does it's to big for a pump gas motor. Here's what a 468" pump gas motor is supposed too sound like, the cam is only .659/663 with a 1050 dom.
http://www.motionbox.com/video/show/...f323c441dab7d8
I built the motor in this car and yes i know every bolt and nut, and everything about it, and yes the 9.77 is ligit it ran that at Baton Rouge in March at 137 mph in the qtr. It weighs 3700 lbs without the 200 lb driver.
With that said i still donot believe Anthony should be selling anything without supervision, and far as Burns is concerned he should butt out, he doesn't have a clue about racing or building.
JMO
Zip.
First and formost both people misrepresented the vehicles that they traded. Neither one knew what they said, and that's sad when you're looking at a potentually $10,000.00 vehicle, which is what it may cost too build either one of them.
First to James, i'm a little amazed that you have traded/sold 300 vehicles and didn't know what your son was trading. If i would have a $10,000.00 vehicle for sale or trade i would know every bolt and nut on it and have proof of it. As for Anthony, he is a child and i don't care if he's 9 yrs old or 15 yrs. old it's your responsibility to know what he's doing and control what he's doing. He can in no way know much about cars even if he's been watching/helping you since he was 10 yrs. old ( and i've seen some nice cars that you have owned/sold in your posting)
Now about Top sportmans post about IP addresses. I'm a little amazed that you didn't know what he was talking about. Every computer logged into RJ shows too him where it's comming from, being a mod for another site for yrs., we have the soft ware to actually see where you live, your physical address ph # etc. and anything else that we might want too know. You are not unknown once you log into the site, every computer has a foot print, how do think the law and fBI track child porn?
O'K about the two vehicles, first i don't like either one of them, 3rd generation Camero's are a dime a doz., the vans i can't believe any body would want one.
2ndly i'm not sure the van that Anthony posted was the bad azz van from Pinks, the van on pinks had port holes, your's did not. I have too admit that the van sounded better than the camero in the vid., but that's only a cam. The Camero sounded like a stock 427 or a stock 454 in my opinion. Still i think you got the better deal, the Camero is a 6 second car with a few changes with what it has. It sounded like it didn't have a gear, converter, or good tuning, maybe some fuel problem. I'd bet money i could turn it into a 6 second car in 48 hrs. for a few hundred bucks. The car weighs 3350 lbs fractory weight. I don't think it has a .738 cam and even if it does it's to big for a pump gas motor. Here's what a 468" pump gas motor is supposed too sound like, the cam is only .659/663 with a 1050 dom.
http://www.motionbox.com/video/show/...f323c441dab7d8
I built the motor in this car and yes i know every bolt and nut, and everything about it, and yes the 9.77 is ligit it ran that at Baton Rouge in March at 137 mph in the qtr. It weighs 3700 lbs without the 200 lb driver.
With that said i still donot believe Anthony should be selling anything without supervision, and far as Burns is concerned he should butt out, he doesn't have a clue about racing or building.
JMO
Zip.