View Single Post
Old 01-09-2011, 03:31 AM
  #4  
rodentinfest
Junior Member
APPRENTICE
 
Join Date: Apr 2006
Location: New Haven, CT
Posts: 16
Default Re: cooling system with Mopar Alky?

Originally Posted by dartsteve
I must say thanks to all the members for there post and the information that they provide to people like me.

here is the question, i have a mopar 500ci with alky bird injection. block is 1/2 filled and aluminum heads. i plan to fun 1/4 mile et bracket. i am looking for input weather or not i should install a radiator? i will be running in Florida heat.

thanks you for all you input.

steve
if your driving it back then you might want to just add a circulation system with a small oil cooler just to release a little heat and a small pump but you will not need a radiator if you adjust the system right. alky, once back to the idle circui, just the barrel valve will keep the engine running cool. you may be a tad rich on idle but people do this with no water but don't drive them back usually. you can tune the barrel valve @ idle to keep the system running as cool as 140° with no large rad
rodentinfest is offline