Originally Posted by greenone60
Originally Posted by spib
Originally Posted by maxpower671
Originally Posted by greenone60
i have a 388 sbc with ik200 brodix heads and solid roller cam and 13.1 comp and it made 600 hp at the flywheel.hopes this helps
please discuss... :wink:
my motor is like guy aboves, 385
010 block, block filled to water pump,13.2to1 compression
all 4340 rotating stuff
210 cnc afr heads, T&d shaft rockers
crower custom built for my motor 4/7,2/3 swap cam, big roller
super victor intake, pro system 4150 carb
Its over 600, and it runs
here are some specs. comp cam part #12-773-8 it is the xr292r cam with spilt duration intake 292 ex 297 intake lift 582 ex 588 and its on 107 center lobe iam running 1.6 rockers,ik200 heads with 200cc runners out of the box,victor jr intake port match to heads,eagle 4340 rotating assy with 6inch h-beam rods,13.1 je pistons,850 quick fuel carb,its in a 79 malibu w/driver 3200 and manily a 7.0 heads up car,best its been on motor is 6.88 1/8 mile
very nice!.....thanks for sharing 8)