To all that can help, I am running a 540 bbc on the street . Compression is 9:6.1 flat top ,Cam is a solid roller isky .313dur. int.
[email protected] .730 lift cam is degreed in at 106.375 and valve to piston clearance is .097. Heads are brodix bb-2 plus and intake is hv 2000 , heads have been flowed and mild port work. They flow on the intake at .700 lift 377 exh.277 carb is a quick fuel950 p series mech. I am currently using autolite #3924 plug,the ground strap heat mark is in the centered from the electrode tip to the middle of the ground strap is this showing the correct range? And the #1 and#2 cylinders are showing alittle more richness than all the other plugs. What is causing theses cylinders to run diferently.