Originally Posted by zipper06
I'm a little confused here. My trans has an electric shift valve body, and you have to push the button to back up. But if you are in low gear, it doesn't change the throttle peddle at all. In other words unless you step on the gas the rpms never change. Must be the way the MSD is wired that causes this to happen. My trans brake button will come on anytime i push it however it does not lock up in high gear (PG) I did have a manuel turbo 400 that would come on and i did accidently hit it one time, it wasn't funny at about 100 ft. out. That why i now have my trans brake button behind the shifter and no where close to the steering wheel.
JMO
Zip.
Zip he has a SLE and they loose all pedal when transbrake is applied and then go full throttle when transbrake comes on. The best way to make sure it doesnt go full throttle is just pull back on the pedal when it looses feeling (unless you have one that keep pressure down to the floor because some do this). The best saftey is to make sure you just have it in 2nd gear the brake should no engage this way.