Hello If your using the stock case I would cut the bell and use a J.W Bell. The 1.76 will work, might want to upgrade to 1.80 if its in the budget. The pump is one area that needs some work, you can modify your pump our buy one that is done. Install 6 to 8 High gear clutches, You can machine the piston down for clearance. Kevlar band, Dual ring servo, Steel clutch hub, 4340 input shaft , Trans brake, seal kit and Deep aluminum pan. If you want I can put a kit price together for you. If you are going to mod your own pump I can help you through that and any other machine work questions. Matt