Need some input from those that know
SBC... AFR 220... #1103 heads. Am running -10 braided lines from the 4 corners of intake/injectors to thermostat crossover area. So far so good.
I emailed AFR and inquired about additional lines, either removing or supplying coolant to the area between siamesed exhaust ports. On my old Brodix heads, I had 1 line from between the intake mani center bolts on each side, and 1 lower on each side of heads, between exhaust port area.
Has anyone plumbed their 220 heads with these types of lines? Perhaps a link or email addy to someone who has. Diagrams??? Help !
We have tons of knowledge from porters, and Tony usually chimes in when AFR pops up. If anyone would know, or have info on passage locations or thickness it would be these folks. I'm trying not to use the provided holes for temp senders/sensors, as I would only be able to utilize only one.... as the other is for temp gauge.
By the way Tony, job well done from a Joisey Guy 8)