Originally Posted by radicalz
Originally Posted by jreiley
How big can a bbc be stroked before the block has to be machined. The block is stock gm. Thanks.
I saw this out there and I tought I would try to answer this....the short deck or tall deck depends on the crank and rods you are going to use usually if going to a 4.125 throw crank you will need to clearance the rods on the oil pan rail...now I'm not sure about the tall deck but be aware that at some point you will need to clearance the crank and rod throws depending on how big you are going....I think the new casting for the big inch crate motors that GM is offering already has those considerations in mind hence the big cubic inch numbers...maybe somebody else has an idea
Thanks for the reply. My thoughts are that I have to replace the rotating assembly anyway and I might as well stroke it. I have very limited access to any good machine shops.