this is what we traded for and did not receive. we did the trade on 8-07-2008 and then it took until 10-01-2008 to get a junk motor. and we shipped out the blower in august and then in september another ad was posted by toTrade containing all the same information below including my blower and everything i sent with it and a car. ad # 1308745.
4 Bolt Main Block (Two Piece Rear Seal), Eagle 4340 Forged Steel Stroker Crankshaft Assembled With H-Series Clevite Rod And Main Bearings Eagle H-Beam Bushed Connecting Rods W/ARP Rod Bolts (Good For Over 700HP) High Performance SRP Forged Pistons 11.0:1 Compression, Hand Filed Performance Rings, Three Piece Billet Double Roller Timing Set, Crane Performance Roller Camshaft, Crane hydraulic Roller Lifters, Performance Heads 64cc With 230cc Intake Runners, Stainless Steel 2.08 Intake Valves, Stainless Steel 1.60 Exhaust Valves, High Performance Valve Springs And Retainers, 7/16 Screw In Studs And Hardened Guide Plates,Manley Chrome Moly Push Rods, 7/16 - 1.6 Aluminum Roller Rockers, Engine Assembled With All Brand New Bolts, High Volume Oil Pump And Screen, Chrome Oil Pan, Chrome Dip Stick And Tube, Polished Aluminum Timing Cover Professional Products SFI Approved performance balancer, Fel-Pro Performance Gaskets, The Complete Rotating Assembly is Balanced Edelbrock Victor Jr. Intake Manifold Chrome Thermostat Housing, Holley street avenger carb. MSD 8.8 Wires, AC delco plugs, Mini starter 2.5 hp, Crank is ballanced w/ 5oz moly.