I am new here, but read your post regarding the 421, 434 project. I would have your New eagle crank checked end to end with a Rockwell Scale for hardness. You will be surprised at the inconsistentsy. Also measure your rod and main journals, and order your bearings accordingly to accomodate clearances. If you use an Eagle rod and you have intentions of putting your engine on the spray, stay away from the lightweight series H-beam rods. The ARP 2000 rod bolt upgrade is a must. Also take them straight to the machine shop, break them down, re-torque, and have them checked for size. Eagle cranks and rods are great items, but they do require some attention.
Josh
Action Engineering
www.actionengineering.net