none of the above
Yes , none of the above usernames as far as you or this board is concerned
our transaction is a private transaction , not generated thru this board
Why don't you tell the WHOLE STORY here , How the deadline was originally to be in Jan or Feb , meeting you halfway in Ohio to transfer this order .
Why don't you tell this board how compassionate you are ?
Such as when you were aware that I was sick in bed from the monday after thanksgiving for six weeks all thru the Holiday season , You tried to jam me up with a bunch of deadlines ,you knew I couldn't meet , due to the amount of machine work which had to be done .
Why don't you list ALL the items which you have received ?
GM High Performance 4 bolt block & main caps ,filled with hardblok to bottom of deck , reconditioned to .030 o.s. & honed , " Bore decks " O " ringed w / stnls wire , w/ freeze plugs , cam bearings ,block galley plugs , rear cam plug ,valley screens .
Cast iron GM cylinder heads , semi-open chamber , NEW bronze guides installed & reamed , exhaust pockets / seats enlarged to
1.880 , Complete valve job , decks milled .
8 Titanium Intake valves , 8 stainless Exhaust valves .
racing guide plates & rocker arm studs .
GM Steel 3.750 Stroke Crankshaft , rod jounal .010 , main journal .010 , polished , oil holes radiused , snout broached for double length i/4" keyway .
Weiand Blower Manifold .
SCE Dead Soft copper head gaskets . ( new )
Set racing intake gaskets . ( new )
gasket set w/ front & rear seals . ( new )
16 stainless rocker arms w/ poly locks .
SFI powerglide flywheel.
Set .010 main bearings . ( new )
Brand New Milodon Funny Car Pan
above items mcauley has received aka baley on here
Why don't you just open right up and say we had a conversation early this week , and I assured you , I would have another shipment of your parts out by the end of this week ?
Why , I'll tell why , Then your statements above would have no foundation , Would they ?
You were notified of this shipment today , along with the tracking number.
Your words when you received the block, heads , and parts -------
" NICE BLOCK , NICE HEADS , NICE MANIFOLD !!!"
Your words when you received the Brand New Mildon Pan " NICE PAN "
You weren't supposed to get a NEW pan you were to get a used pan .
I did email you when I was sick and tell you , you would get MORE than you bargained for didn't I
You weren't to get titanium valves either were you ?
I see no reason why you are on here , but you have good reason ??
You think I'm not interested in getting this over , get a life