First off r8ceredy welcome to the RJ forum.I am sure you'll get some feedback here on your combination.
Sounds like you are going to have a real nice engine,there for I'd say your alright with the stock bolts in the caps,with that HP level,but thats my opinion.
Then BBC will take a decent amount of HP,I'd say in the neighborhood of 700 to 750 hp then I'd stud the bottom end.
Just make sure your clearances up up to snuff for this combination to live,and a good oiling system,don't cheap out on the oil pump,
Make sure the crank rods and pistons are balanced and get a good machinest to mic up the crank and rods to ensure it is within tolerances,this is a big thing when using Eagle brand parts,things I have found,is their clearances are on the tight side.And you don't want that.
Who's next?
Thanks for stopping by
Tom
__________________
There Is 1 Thing Better Than Cubic Inches,,,More Of Them