Thread: valve lash
View Single Post
Old 07-29-2007, 02:56 PM
  #2  
sg1586
Senior Member
MASTER BUILDER
 
Join Date: Dec 2003
Posts: 185
Default

You can pull the plugs out and turn it over with a long handle 1/2 ratchet using the damper bolt........

If you don't have one you can put a starter button on the firewall where you can reach it from eather side or just put 2 on (one on each side) and bump it over to check your lash...I think this is how most do it..Good luck
sg1586 is offline