Racingjunk Forums

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Engine Tech (https://www.racingjunk.com/forums/forumdisplay.php?f=9)
-   -   Engine HP and Trq Guess ? (https://www.racingjunk.com/forums/showthread.php?t=30587)

hammertime 06-20-2011 07:36 AM

Engine HP and Trq Guess ?
 
Lets have a little fun, nothing for the winner but some pride ;)

Going to dyno my new engine this week, lets take some guesses at what its going to make for HP and TRQ #'s

Here are the specs

598 CI BBC
9.800 Short Deck Engine
4.5 Stroke Callies Crank
6.385 Manley Rods
4.600 Wiseco Q16 Pistons 14.8:1 Compression

Cam- Roller Cam Custom Ground 800/780 Lift

Moroso Oil Pan, Steel with single trap door (nothing special)
Moroso Billet Oil Pump

Heads
BMF 385s Fully CNC'd
2.35 Stainless Steel Intake Valves
1.880" Stainless Steel Exhaust Valves

Sniper Intake Manifold Ported

With a 2100cfm Rons Terminator on top :)

Lets here some guesses, plan to run it up to 7500 on the dyno.

bbchevy 06-20-2011 10:22 AM

Guess/////////////>?
 
1065
Later
'G 8)

itsabird 06-20-2011 12:12 PM

1100hp.

hotrod1994 06-20-2011 05:48 PM

plus side of 1050 how much idk but thats making some serious power

fast75vega 06-20-2011 05:59 PM

i will go with around 1040ish with about 890 ft pounds of torque

fast75vega 06-22-2011 07:48 AM

any numbers yet?

hammertime 06-22-2011 07:53 AM


Originally Posted by fast75vega
any numbers yet?

Not yet it'll be tomorrow or friday,

My guess 1068hp and 852. I said 1050 when I went into it so anything above that is a bonus.

fast75vega 06-22-2011 07:58 AM


Originally Posted by hammertime

Originally Posted by fast75vega
any numbers yet?

Not yet it'll be tomorrow or friday,

My guess 1068hp and 852. I said 1050 when I went into it so anything above that is a bonus.

cool... really wondering what that monster will pull

fla1976 06-22-2011 01:28 PM

1071 HP & 874.

fast75vega 06-22-2011 01:47 PM

hey hammer..... u doing a motor dyno or chassis?

hammertime 06-22-2011 02:12 PM


Originally Posted by fast75vega
hey hammer..... u doing a motor dyno or chassis?

Motor Dyno. Advanced Product Design (APD) is doing the engine and they have a dyno in house also. Going to also dyno it with their new alky carb.

hammertime 06-24-2011 08:40 PM

Just getting in from the garage. Want to say what a treat it was to deal with APD on this entire engine build. A lot of knowledge of cams and head work.

The results
Peak HP 1032 @ 7300
Peak Trq 899 @ 5800

Average HP between 6200 and 7300 rpms 1018
Average Trq - 793

M5 Alky it peaked at 1049@7300

It made a touch less peak then we thought it may but in the same not 1032 peak and 1018 average it was a very good combo all the way through. I have it in the car and almost ready for the track tomorrow afternoon.

fast75vega 06-24-2011 11:04 PM


Originally Posted by hammertime
Just getting in from the garage. Want to say what a treat it was to deal with APD on this entire engine build. A lot of knowledge of cams and head work.

The results
Peak HP 1032 @ 7300
Peak Trq 899 @ 5800

Average HP between 6200 and 7300 rpms 1018
Average Trq - 793

M5 Alky it peaked at 1049@7300

It made a touch less peak then we thought it may but in the same not 1032 peak and 1018 average it was a very good combo all the way through. I have it in the car and almost ready for the track tomorrow afternoon.

boy.... looks like i hit the nail on the head..... whoo hooo

hammertime 06-25-2011 04:58 AM


Originally Posted by fast75vega

Originally Posted by hammertime
Just getting in from the garage. Want to say what a treat it was to deal with APD on this entire engine build. A lot of knowledge of cams and head work.

The results
Peak HP 1032 @ 7300
Peak Trq 899 @ 5800

Average HP between 6200 and 7300 rpms 1018
Average Trq - 793

M5 Alky it peaked at 1049@7300

It made a touch less peak then we thought it may but in the same not 1032 peak and 1018 average it was a very good combo all the way through. I have it in the car and almost ready for the track tomorrow afternoon.

boy.... looks like i hit the nail on the head..... whoo hooo

Yes you did :) I assume this dyno is a little weaker then the last engine builders was. I'll know today :)

maxpower671 06-25-2011 02:46 PM

very nice!
 
very nice David!

do you have any recent pics? 8)


All times are GMT -8. The time now is 07:05 AM.