![]() |
new ptoject
any one have a decent rear deck wing for a 88 formula fire bird
http://i783.photobucket.com/albums/y...3/gegm/066.jpg http://i783.photobucket.com/albums/y...3/gegm/065.jpg http://i783.photobucket.com/albums/y...3/gegm/064.jpg http://i783.photobucket.com/albums/y...3/gegm/063.jpg |
I believe I know where one's at!! I'll check up on it seeing that I have to go get some camaro parts soon.
|
Ok I am looking at a picture of it on an old broken down laptop so I can't upload it but guess what it's on a red t-top car the wing is black not sure about the 3rd brake light but it looks similar from what I can see I'll try to get pictures of it up if possible. But no promises. LOL
|
http://sphotos.ak.fbcdn.net/hphotos-..._6480808_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-..._6344602_n.jpg Sorry that they aren't up close but thats the only photos I have. But I'll check up on it. |
the one on the bird is correct but check and make sure its not spongey or soft. mine is in that condition almost like a sponge all soft
|
Ok I will. I new I had seen one on a car but took me awhile to find it and get where I could upload it. But yea I'll see how much he'd want and see if it's any good.
|
cool
|
ok guys heres a cunundrum im having car came with another tbi 305 but i have my carbed 350 now some peopple say the torque tube set up sucks but i dont have any experience plus what would have to be done to convert to carb set up current intank pump is either shot or relay bad so what would have to be done to convert
|
I dont know if it would be the same but in my 84 Chevy truck I went from teh computerized carb to a regular carb and just switched carbs. Still have the same intake that was installed on the 350 that was in the truck on the 400 that is in the truck now.
|
diff dirka this fuel injected throttle body 305 vs. carbed 350 this car has pump in tank vs, mech on block
|
Isnt there a blocker plate on the block where a fuel pump would go on the TBI engine??
I didnt realize the differnces between the two. It was late at night when I replied and I wasnt thinking clearly. LOL |
Originally Posted by DirkaDirka
Isnt there a blocker plate on the block where a fuel pump would go on the TBI engine??
I didnt realize the differnces between the two. It was late at night when I replied and I wasnt thinking clearly. LOL |
Put a sump kit in the tank and put an electric fuel pump mounted under the car.
|
IF ITS GOING TO BE JUST A STREET CAR THIS WILL WORK, PUTS OUT SAME AS STOCK MECH PUMP, NO SUMP REQUIRED JUST PUT IT IN THE FUEL LINE. IVE USED THESE IN PLACE OF STOCK FUEL PUMP WHEN CAM LOBE TO DRIVE PUMP HAS WORN OUT. http://www.summitracing.com/parts/ACF-EP90/
|
I am confused. Do you want to use the block that has provisions for a mechanical pump or do you want to use the block without mechanical pump?
|
Originally Posted by MEMRACING62
IF ITS GOING TO BE JUST A STREET CAR THIS WILL WORK, PUTS OUT SAME AS STOCK MECH PUMP, NO SUMP REQUIRED JUST PUT IT IN THE FUEL LINE. IVE USED THESE IN PLACE OF STOCK FUEL PUMP WHEN CAM LOBE TO DRIVE PUMP HAS WORN OUT. http://www.summitracing.com/parts/ACF-EP90/
|
just trying to deside wich way to go and if i went with my 350 and new holley mech pump if i can just splice in to fuel line (since in tank pump not working) or if i have to do a bunch of other mods to fuel system or do i get a block off plate and run the electric pump and get a regulator or just put tbi 305 that came with the car ( a used replacement) and run it. its a mostly street car maybe few fun runs next year at street fights here in bristol
|
Originally Posted by dragonmaster093
just trying to deside wich way to go and if i went with my 350 and new holley mech pump if i can just splice in to fuel line (since in tank pump not working) or if i have to do a bunch of other mods to fuel system or do i get a block off plate and run the electric pump and get a regulator or just put tbi 305 that came with the car ( a used replacement) and run it. its a mostly street car maybe few fun runs next year at street fights here in bristol
|
can pump be removed and piece of line put in its place
|
anything can be done.....WERE HOT RODDERS! :lol: dont think trying to pull through a dead pump would work.
|
well ill try to rplace pump with tube if works cool if not ill try somethong else
|
Originally Posted by dragonmaster093
well ill try to rplace pump with tube if works cool if not ill try somethong else
|
wonder if the tank unit out of a carbed gen 3 would fit that tank, if so change tank unit. :idea:
|
any body even know how much fuel pressure those tbi pumps run?
|
update car is gone
|
| All times are GMT -8. The time now is 09:18 AM. |