Re: oil pump
 

x2 Available in +10% or +25% volumn, larger inlet hole, threaded pressure relief spring plug and the gear shafts go into the cover.
Then (like DD said) totally dissambled and blueprinted.
Dave

Pops always said "We use a Meling SELECT. Later J.Smith 4621 racing " I dont change anything he says T Smith 4623 racing

how do you blueprint an oil pump? What are the measurements and tolerances and how do you adjust them?

Good question Tod, I just deburr everything real good, make sure everything operates smoothly, loc-tight the cover bolts weld pick tube and be done with it.

I've always run Melling HV pumps, never had any problems.
I have heard about the powered metal gear problem(s) but I have yet to see one that has failed>
I'd Like to know more about it and when the switch to powered metal gears was made.

Anybody?


Now if money is not a object then go with a Titan, they are bulletproof.

www.titanspeed.com

Cp

oil pump
 

CVR a good pump for the money, they have really good stuff check them out

Re: oil pump
 

Thats hard to do when they don't answer their phone or emails.

oil pumps
 

Thats hard to do when they don't answer their phone or emails......... i agree but it might be your time zone difference i had that problem to but once i figured it out i got ahold of them right away and competion productssells there stuff to if you know what you want

SBC oil pumps
 

I tried for months to buy CVR BBC oil pumps from Competition Products and direct from CVR. All I ever got was "They are out of stock" or "Production has been delayed" from both of them. CVR would answer my emails but never would tell me when I could get my hands on one. Competition Productd would just keep trying to upgrade me to a CVR aluminum pump which I did not want.
I wonder if they have actually ever produced any at any time?

Melling Select 10552 10% more Volume high presssure, Designed to be Happy at 70psi. Been running it for 2 seasons now with Very good Results.
It is made for a Bolt on or press in pickup tube but I ended up having to use a press-in style and welded it fully.

I use Melling part # MEL 10552 around $50 bucks never a problem, has bolt on pick-up and steel billet gears and cnc machined gear cover,,hard to beat for the money,,,,Paul