Racingjunk Forums
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Racingjunk Forums (https://www.racingjunk.com/forums/index.php)
-   Engine Tech (https://www.racingjunk.com/forums/forumdisplay.php?f=9)
-   -   Don't remember who (https://www.racingjunk.com/forums/showthread.php?t=25402)

oldandtired 09-02-2009 01:30 PM
You want inches?
CP offers the All Star 708 cid. Bore = 4.75 x 5.000 stoke with 8.00 Oliver rods. The bore spacing is 5.400 so 940cid is possible (5.100 x 5.75).
BBC bellhousing, exhaust and motor mount patterns.
Canfield aluminum heads, 2.400 intake valve, 2.00 exhaust valve with 2:1 shaft rockers and 1.725 roller springs.
Can you say "Oh yeah"????

Dave

DirkaDirka 09-02-2009 01:51 PM
Originally Posted by oldandtired
You want inches?
CP offers the All Star 708 cid. Bore = 4.75 x 5.000 stoke with 8.00 Oliver rods. The bore spacing is 5.400 so 940cid is possible (5.100 x 5.75).
BBC bellhousing, exhaust and motor mount patterns.
Canfield aluminum heads, 2.400 intake valve, 2.00 exhaust valve with 2:1 shaft rockers and 1.725 roller springs.
Can you say "Oh yeah"????

Dave
And how much does that cost?? That way I can pick one up. :D

OneBadGMC 09-02-2009 02:15 PM
Originally Posted by oldandtired
You want inches?
CP offers the All Star 708 cid. Bore = 4.75 x 5.000 stoke with 8.00 Oliver rods. The bore spacing is 5.400 so 940cid is possible (5.100 x 5.75).
BBC bellhousing, exhaust and motor mount patterns.
Canfield aluminum heads, 2.400 intake valve, 2.00 exhaust valve with 2:1 shaft rockers and 1.725 roller springs.
Can you say "Oh yeah"????

Dave
That's a small block??? :shock: :?

TheRabbit 09-02-2009 04:48 PM
My home PC died, but I have a link saved to a 632 small block chevy. I'll try to find it and post it for you guys.

oldandtired 09-03-2009 08:35 AM
Originally Posted by DirkaDirka
Originally Posted by oldandtired
You want inches?
CP offers the All Star 708 cid. Bore = 4.75 x 5.000 stoke with 8.00 Oliver rods. The bore spacing is 5.400 so 940cid is possible (5.100 x 5.75).
BBC bellhousing, exhaust and motor mount patterns.
Canfield aluminum heads, 2.400 intake valve, 2.00 exhaust valve with 2:1 shaft rockers and 1.725 roller springs.
Can you say "Oh yeah"????

Dave
And how much does that cost?? That way I can pick one up. :D
$48K Broken in and dyno sheet. 850HP and 900 FT Lbs torque naturally aspirated. At that price you should buy two! Dave

oldandtired 09-03-2009 08:36 AM
Originally Posted by OneBadGMC
Originally Posted by oldandtired
You want inches?
CP offers the All Star 708 cid. Bore = 4.75 x 5.000 stoke with 8.00 Oliver rods. The bore spacing is 5.400 so 940cid is possible (5.100 x 5.75).
BBC bellhousing, exhaust and motor mount patterns.
Canfield aluminum heads, 2.400 intake valve, 2.00 exhaust valve with 2:1 shaft rockers and 1.725 roller springs.
Can you say "Oh yeah"????

Dave
That's a small block??? :shock: :?
Anything under 600 inches is a small block. JMO... Dave :D


All times are GMT -8. The time now is 11:28 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page