en-us Tue, 26 May 2026 14:17:47 GMT 184796661 https://www.motorheadmedia.com/heads/184796661/gm-bowtie-big-block-aluminum-heads-p-n-14044861-.html Used Chevrolet Big Block Bowtie Heads – P/N 14044861 Taken in on trade from a customer engine. Heads have been lightly ported and previously filled with epoxy (will need to be redone). Moroso A+B epoxy included. Exhaust ports are untouched, so buyer can finish them to their preference. Been sitting in the shop, just dusty. I planned to reuse them but going a different direction. Used condition Valves available at extra cost OBO Shipping at buyer’s expense Message me with any…

]]> Engine Parts: Heads Mon, 25 May 2026 13:11:55 GMT 184796659 https://www.motorheadmedia.com/intake-manifolds/184796659/holley-dominator-carburetor-1150-cfm-fresh-rebuild.html Holley Dominator Carburetor (Approx. 1150 CFM) Pulled from a 632 BBC dual-carb setup. Freshly rebuilt and only has a few passes since. In excellent working condition. Ready to run. Shipping available at buyer’s expense.

]]> Engine Parts: Intake Manifolds Mon, 25 May 2026 12:57:47 GMT 184796655 https://www.motorheadmedia.com/heads/184796655/wiseco-bbc-pistons-548ci.-in.html Wiseco 14:1 BBC Pistons. New in Box Brand new Wiseco pistons for 548 cu. in. Big Block Chevy. 14:1 compression. Comes complete with pins and spiral locks. Never used, still in the box. Shipping available at buyer’s expense Message if interested

]]> Engine Parts: Heads Mon, 25 May 2026 12:07:37 GMT 184796651 https://www.motorheadmedia.com/intake-manifolds/184796651/edelbrock-pro-ram-bbc.html BBC Pro Ram Tunnel Ram. Like New Like-new Pro Ram Tunnel Ram for Big Block Chevy (BBC). In excellent condition, basically brand new. These typically sell for over $800, asking $500. Great setup for performance builds.

]]> Engine Parts: Intake Manifolds Mon, 25 May 2026 11:48:01 GMT 184796650 https://www.motorheadmedia.com/fuel-pumps-system/184796650/weldon-1100-a-fuel-pump-regulator.html Weldon Fuel Pump + Aeromotive Regulator Weldon fuel pump paired with an Aeromotive fuel pressure regulator. Solid setup for high-performance or racing builds. Strong, consistent fuel delivery Great for carb or EFI setups Ready to install Perfect for anyone upgrading their fuel system or running big power.

]]> Engine Parts: Fuel Pumps/System Mon, 25 May 2026 11:34:24 GMT 184554173 https://www.motorheadmedia.com/valve-covers/184554173/chevrolet-348-409-chrome-valve-covers-no-bow-ties.-.html Chevrolet 348 409 chrome valve covers no bow ties. chrome covers no bowties or wire supports. CALL FOR MORE INFO 507-233-1958

]]> Engine Parts: Valve Covers Mon, 25 May 2026 07:50:04 GMT 184783942 https://www.motorheadmedia.com/rotating-assemblies/184783942/555-bb-chevy-balanced-rotating-asy..html 555 BB Chevy Balanced Rotating Asy. 12.5 Compression 4340 4.250 2pc R/S Crank 6.385 H Beam Rods With ARP2000 Bolts SRP 33cc Dome Pistons Plasma Moly Rings King Race Bearings Internally Balanced Only 3 kits available at this price. 1 week to Ship Regular Price $2825.00

]]> Engine Parts: Rotating Assemblies Mon, 25 May 2026 07:50:03 GMT 184781544 https://www.motorheadmedia.com/blocks/184781544/-aluminum-engine-block-sb-chev-new-now-reduced-to-4499.html >> FOR SALE----"NEW".. "ALUMINUM" SB CHEV "BARE" Engine BLOCK ..NEW from Pro-Comp ..Had originally bought 3 of these and used 2 in Previous Builds, but now going to concentrate on BB Chev Engines. This NEW block is based on 9.025 Deck Height, Accepts 2 Piece Rear Main Seal, has rough bore size of 4.120" (4.125) and Features 4 BOLT MAIN CAPS "BILLET STEEL" on ALL 5 Positions with a MAIN STUDS INSTALLED the Mains accept the more Popular 350 Main…

]]> Engine Parts: Blocks Mon, 25 May 2026 07:50:03 GMT 184719946 https://www.motorheadmedia.com/starters/184719946/rcd-48-volt-blower-fixed-starters-in-stock-alkydigger.html NEW NOT rebuilt USUALLY STOCK 5 OF THESE Single handle RCD Starter- 48 V Most Popular one 100500-0011 RCD 600 RPM @ 100 LBS Torque ( be careful with the cheaper 400 rpm 75 lbs Rebuilt Stuff ) The blower mount removable starter features unobstructed access to the blower belt and top sprocket. This assembly features an aluminum frame and steel handle, and quick disconnect plug mounted on the starter. A hand wheel at the rear of the starter is used to manually engage the jaws…

]]> Engine Parts: Starters Mon, 25 May 2026 07:50:03 GMT 184717362 https://www.motorheadmedia.com/oil-pumps-pans-system/184717362/milodon-big-block-chevy-10-qt-oil-pan-like-new-.html Milodon Big Block Chevy 10 qt oil pan Like New ! For a Funny Car dragster or Altered Included twin baffles and windage tray Also included are 2 Moroso electric heating pads Email - Johncerhioracing@gmail.com Phone 732-581-1651

]]> Engine Parts: Oil Pumps/Pans/System Mon, 25 May 2026 07:50:03 GMT 184707921 https://www.motorheadmedia.com/rotating-assemblies/184707921/565-rotating-assembly-sr20.html COMPLETE ROTATING ASSEMBLY. THIS ASSEMBLY IS USED AND HAS ABOUT 30 PASSES ON IT. CALLIES MAGNUM CRANK STD STD WITH OLIVER STD RODS 6.385. WIESCO SR 20 PISTONS 28CC DOME WITH A 1.27 C/D. INCLUDES MATCHED COATED ROD BEARINGS. BALANCED AT LESS THAN .2 OZ INCHES. THIS COMBINATION IS 14.72 TO 1 WITH A 100CC CHAMBER .005 IN THE HOLE. TOTAL SEAL RING SET AP TOP NAPIER SECOND. SHIPPING IS NOT INCLUDED. PLEASE CALL ISLAND RACING 802-372-8565 WITH ANY QUESTIONS.

]]> Engine Parts: Rotating Assemblies Mon, 25 May 2026 07:50:03 GMT 184707446 https://www.motorheadmedia.com/blowers/184707446/whpple-superchargers-east-coast-dealer-alkydigger.com-.html 2024-2025 Mustang up to 1200 hp Easily Whipple Gen 6 3.0L Supercharger for GT and Darkhorse *875HP, 650FT-LB of torque on 93 Octane 50 State legal bolt on performance Patented dual intercooler, dual pass technology Billet 112mm throttle body Massive 120mm Y inlet for over 1800HP Capable air flow High Flow Air Filters Billet fuel rails with GT500 Fuel Injectors Tomahawk hand held Flash tool ================================================================THE KING OF HORSEPOWER, WHIPPLE…

]]> Engine Parts: Blowers Mon, 25 May 2026 07:50:03 GMT