en-us Wed, 16 Sep 2026 16:37:06 GMT 184819874 https://www.motorheadmedia.com/engine-machining/184819874/sunnen-lbb-1810-power-stroke-rod-hone-nt-rottler-.html Sunnen Connecting Rod Machine. Power Stroking with ring set.

]]> Tools and Shop Equipment: Engine Machining Wed, 16 Sep 2026 07:50:05 GMT 184801175 https://www.motorheadmedia.com/engine-machining/184801175/dcm-tech-3810-cbn-head-and-block-surfacer.html Fantastic lightly used DCM CBN surfacer with roll over fixture and parallels. Excellent condition, ready to go to work. Call Monty for more details. 404-660-8271 Make offer

]]> Tools and Shop Equipment: Engine Machining Wed, 16 Sep 2026 07:50:05 GMT 184634710 https://www.motorheadmedia.com/hand-tools/184634710/premium-clamptite-tool-kit.html Premium ClampTite Tool Kit Stainless Steel w/Bronze Nut with 2 rolls of Stainless Steel wire (304 .32" and .41") This tool is machined stainless steel with a one piece body and bronze nut. The tool was designed with the detailed craftsman who needs a long lasting tool able to hold up to extremely tough wire while clamping, binding and pulling the wire until the job is complete

]]> Tools and Shop Equipment: Hand tools Tue, 15 Sep 2026 07:50:18 GMT 184614993 https://www.motorheadmedia.com/other/184614993/cuda-parts-washer.html Cuda Parts Cleaner Model 2216 Has approx 30 hours, been sitting in storage for the last few years

]]> Tools and Shop Equipment: Other Tue, 15 Sep 2026 07:45:14 GMT 184355666 https://www.motorheadmedia.com/dynos/184355666/mustang-dyno.html MD-AWD-1100

]]> Tools and Shop Equipment: Dynos Tue, 15 Sep 2026 07:45:14 GMT 184827748 https://www.motorheadmedia.com/other/184827748/longacre-racing-scales-and-sidesliders.html I have a very well cared for set of Longacre racing scales (1500 lb each capacity) and the Longacre side sliders and plate to go with them. I also have the Longacre cases for the scales and the electronic control module. Due to the weight and size, local pickup is preferred.

]]> Tools and Shop Equipment: Other Mon, 14 Sep 2026 23:39:45 GMT 184729848 https://www.motorheadmedia.com/dynos/184729848/md-500-awd-mustang-dyno.html MD-500 Awd Dyno. Updated software, New belts and Airbag replaced within the last year. Works Flawlessly.

]]> Tools and Shop Equipment: Dynos Mon, 14 Sep 2026 07:45:14 GMT 184827657 https://www.motorheadmedia.com/other/184827657/intercomp-vehicle-wheel-scales-lp600rxf-low-profile-wireless.html Intercomp LP600-RFX low profile wireless wheel load scales. Manufactured in the USA and comes in a capacity 10,000 lb. per pad and weighs in 5 lb. increments. Can weigh up to 40,000 lb. The scale weight per pad is 45 lb. making it ideal for portable application. The scale has an overall height of 1.5″ (38mm), an accuracy of +/-1%, and battery life up to 250 hours. The LP600-RFX features solar charging built into each pad that provides up to one year of battery life with daytime and outdoor…

]]> Tools and Shop Equipment: Other Sun, 13 Sep 2026 18:50:45 GMT 184827566 https://www.motorheadmedia.com/engine-machining/184827566/serdi-101-seat-guide-machine-w-tooling.html Serdi 101 Heavy Duty Seat & Guide Machine. 220 Single phase. Comes with original instruction & operators manual, along with the form tools and pilots catalog. It is well tooled and comes with the Tooling shown in the pictures. Came out of a shop the recently closed. Email or call with questions. Shop number 505-275-7877

]]> Tools and Shop Equipment: Engine Machining Sat, 12 Sep 2026 05:25:04 GMT 184827565 https://www.motorheadmedia.com/engine-machining/184827565/abs-cam-polisher-32-model-5644-bmp-vs-32.html ABS Cam Polisher 32". In almost new condition. Selling for $5000, shop number 505-275-7877 150 rpm, 110 volt-60hz lathe motor with variable speed control 1725 rpm, 110 volt-60hz sanding belt motor 6″ – 3 jaw chuck Separate safety switches for Lathe and Sanding Belt motors Accepts 72″ belts, 5/8″ to 2″ widths Aircraft aluminum belt drive and idlers pulleys Integral belt guard for your safety Spring loaded arm for ease of belt changes Foot operate, spring loaded,…

]]> Tools and Shop Equipment: Engine Machining Sat, 12 Sep 2026 05:10:12 GMT 184827560 https://www.motorheadmedia.com/engine-machining/184827560/kansas-instrument-jet-washer-vat-parts-cleaner-w-soak-tank.html Kansas Instruments Jet Washer / Vat Parts Cleaner. Model SKS-2233E, 3 Phase, 5 Horse Power Motor. Dimensions and Foot Print are 53" Wide x 83" Long with the door open x 66" Tall. Has a soak tank that is 21"w x 36"L. Has a 21" Turn Table, and inside height of 32". Shop number 505-275-7877

]]> Tools and Shop Equipment: Engine Machining Sat, 12 Sep 2026 04:55:35 GMT 184827558 https://www.motorheadmedia.com/engine-machining/184827558/winona-van-norman-vb160-bore-mill-w-tooling-gas-or-diesel.html Winonan Van Norman VB160SF Bore Mill. Comes with 3 Bore Heads and other tooling, and the Roll Over Cradle and Head Plate Fixture. Mill will bore up to 8 inch dia. has 14 inch boring spindle with three boring heads, Sandvic milling head, quick clamps, parallel supports, clamp sets, and other tooling including bore mic, bits and bit holders. There is a lot of tooling. (see pictures) It has the XYZ Digital Readout, VB Control Panel with LED read outs for spindle rate, power head down feed and table…

]]> Tools and Shop Equipment: Engine Machining Sat, 12 Sep 2026 04:30:00 GMT